3d福彩开奖结果走势图 - 3d福彩开奖结果今日

首页 > 院系 > Yufan Zheng

Profile

Dr. Yufan Zheng (郑羽帆) received his Ph.D. degree in Mechanical Engineering at the University of Alberta, Canada in 2020. In 2016, he got the MSc degree in Advanced Manufacturing Technology & Systems Management at the University of Manchester, UK. He earned his B.Eng in Mechanical Engineering from Southwest Jiaotong University in 2012.
From 2020 to 2021, he was working as a postdoctoral fellow at the Laboratory of Intelligent Manufacturing, Design, and Automation (LIMDA), University of Alberta, leading the project of design and development of systems for autonomous repair technologies.
Currently, Dr. Yufan Zheng is an Assistant Professor in the School of Intelligent Manufacturing Ecosystem, his research interests include Process Planning for Manufacturing, Artificial Intelligence for Additive Manufacturing, Hybrid and Smart Manufacturing, Repairing & Remanufacturing.

Recruiting self-motivated Ph.D. students. Candidates with interests in intelligent manufacturing process planning, and scheduling optimization are encouraged to apply.

Qualifications
- PGcert, Teaching and Supporting Learning in Higher Education, University of Liverpool, UK, 2023
- Ph.D., Mechanical Engineering, University of Alberta, Canada, 2020
- MSc (Distinction), Advanced Manufacturing Technology & Systems Management, University of Manchester, UK, 2016
- B.Eng, Mechanical Engineering, Southwest Jiaotong University, China, 2012
Experience
- Assistant Professor, XJTLU, China, 2021-present
- Postdoctoral fellow, University of Alberta, Canada, 2020-2021
- Research assistant, University of Alberta, Canada, 2017-2020
- Teaching assistant, University of Alberta, Canada, 2017-2020
Research interests
- Scheduling and Process Planning Optimization
- Additive Manufacturing
- Repairing & Remanufacturing
Articles
- W Zhang, Y Zheng*, W Ma, R Ahmad, "Multi-task scheduling in cloud remanufacturing system integrating reuse, reprocessing, and replacement under quality uncertainty", Journal of Manufacturing Systems (2023) (IF:9.498, 中科院一区)
- J Liu, J Huang, Y Zheng, S Hou, S Xu, Y Ma, C Huang, B Zou, L Li, "Challenges in topology optimization for hybrid additive-subtractive manufacturing: A review", Computer-Aided Design (2023) (IF:3.652, 中科院二区)
- HZ Imam, H Al-Musaibeli, Y Zheng, P Martinez, R Ahmad*, "Vision-based spatial damage localization method for autonomous robotic laser cladding repair processes", Robotics and Computer-Integrated Manufacturing (2023) (IF: 10.103, 中科院一区）
- W Zhang, Y Zheng*, R Ahmad*, "An energy-efficient multi-objective scheduling for flexible job-shop-type remanufacturing system", Journal of Manufacturing Systems (2023) (IF:9.498, 中科院一区)
- D Zhu, Y Zheng, Y Xiong, C Cui, F Ren*, Y Liu*, "In situ growth of S-doped ZnO thin film enabling dendrite-free zinc anode for high-performance aqueous zinc-ion batteries", Journal of Alloys and Compounds (2022) (IF:6.371, 中科院一区)
- W Zhang, Y Zheng*, R Ahmad*, "The integrated process planning and scheduling of flexible job-shop-type remanufacturing systems using improved artificial bee colony algorithm", Journal of Intelligent Manufacturing (2022) (IF: 7.136, 中科院一区)
- H Mamledesai, Y Zheng, R Ahmad, "Teaching machines to optimizing machining parameters: using independent fuzzy logic controller and image data", SN Applied Sciences (2022)
- Y Miao, Y Zheng, F Tao, Z Chen, Y Xiong, F Ren, Y Liu, "Synthesis and application of single-atom catalysts in sulfur cathode for high-performance lithium–sulfur batteries", Chinese Chemical Letters (2022) (IF: 8.455, 中科院一区)
- Y.Zheng, W. Zhang, D. Baca, R. Ahmad*, “Scientometric analysis and Systematic review of multi-material additive manufacturing of polymers”, Polymers (2021) (IF:4.967, 中科院二区)
- Y. Zheng, and R. Ahmad*, “Feature extraction and process planning of integrated hybrid additive-subtractive system for remanufacturing”, Mathematical Biosciences and Engineering (2021) (JCR Q3)
- P. Yepez, Y. Zheng, Z. Liu, B. Alsayyed and R. Ahmad*, “An automated intelligent feature-based maintenance plan generation method,” Computer-aided design and application (2021)
- Y. Zheng, H. Mamledesai, H. Imam and R. Ahmad*, “A novel Deep learning-based automatic damage detection and localization method for remanufacturing/repair”, Computer-aided design and application (2021)
- H. Imam, Y. Zheng, R. Ahmad*, “An efficient tool-path planning approach for repair of cylindrical components via laser cladding, Journal of Remanufacturing (2021)
- Y. Zheng, J. Liu*, and R. Ahmad*, “A cost-driven decision method for hybrid additive-subtractive remanufacturing,” Journal of Manufacturing Systems (2020) (IF:9.498, 中科院一区)
- Y. Zheng, J. Liu, Z. Liu, T. Wang, and R. Ahmad*, “A Primitive-based 3D Reconstruction method for Remanufacturing,” International Journal of Advanced Manufacturing Technology (2019) (IF:3.563, 中科院三区)
- J. Liu, Y. Zheng, R. Ahmad, J. Tang and Y. Ma*, “Minimum length scale constraints in multi-scale topology optimization for additive manufacturing,” Virtual and Physical Prototyping (2019) (IF: 10.962, 中科院一区)
- L. Li, Y. Zheng, M. Yang, J. Leng, Z. Cheng, Y. Xie, P. Jiang and Y. Ma*, “A survey of feature modeling methods: Historical evolution and new development”, Robotics and Computer-Integrated Manufacturing (2020) (IF: 10.103, 中科院一区)
- J. Liu, Q. Chen, Y. Zheng, R. Ahmad, J. Tang, and Y. Ma*, “Level set-based heterogeneous object modeling and optimization,” Computer-aided Design (2019) (中科院二区)
- J. Liu, Y. Zheng, Y. Ma, A. Qureshi, and R. Ahmad*, "A topology optimization method for hybrid subtractive-additive remanufacturing,” International Journal of Precision Engineering and Manufacturing-Green Technology (2019) (中科院三区)
- Y. Zheng, A. J. Qureshi, and R. Ahmad*, “Algorithm for remanufacturing of damaged parts with hybrid 3D printing and machining process,” Manufacturing Letter (2018)
Proceedings
- Y. Zheng and R. Ahmad*, “Automated feature extraction for hybrid additive-subtractive”, Procedia Manufacturing (2020)
- Y. Zheng, G. Caetano, P.J. Bartolo*, "Morphological, mechanical and biological assessment of bioceramic scaffolds for bone regeneration", Proceedings of the International Conference on Sustainable Smart Manufacturing (2016)
Conference presentations
- 2020, CAD'20, Barcelona, Spain, "An Automated Intelligent Feature-based Maintenance Plan Generation Method".
- 2020, 53rd CIRP Conference on Manufacturing Systems, Chicago, U.S., "Automated Feature Extraction for Hybrid Additive-Subtractive Remanufacturing".
- 2020, CAD'20, Barcelona, Spain, "Deep Learning-based Automatic Damage Recognition and Spatial Localization for Remanufacturing/Repair".
- 2020, MIF Autonomous Systems Initiative Workshop, Edmonton, Canada, "Autonomous Inspection and Damage Extraction System for Remanufacturing ".
Grants
- PI, 2023-2024, Mazda RX-7 Model 3D Reconstruction and 3D Printing Project (横向项目)
- PI, 2023-2024, Development of Intelligent Asphalt Road Repair Robot (横向项目）
- PI, 2023-2024, Development of Asphalt Pavement Crack Recognition Algorithm (横向项目)
- PI, 2023-2024, Design and Development of Autonomous Navigation Four-Wheeled Vehicle for Road Surfaces (横向项目）
- PI, 2023-2025, Research on theory and method of remanufacturing task scheduling based on cloud platform, Natural Science Foundation of the Jiangsu Higher Education Institution Programme (省部级）
- PI, 2022, 江苏省双创博士项目 (省部级）
- PI, 2022-2025, Inspection and control system development for robotic additive manufacturing devices (横向项目)
- PI, 2022-2025, Dynamic integrated process planning and scheduling for remanufacturing, RDF (校级)
- Co-PI, 2022-2024, Systems Approach to Smart Technologies Transition in Multiple Manufacturing Contexts, RDF (校级)
- PI, 2021-2023, Hybrid Additive/Subtractive Manufacturing Technology for Disc Part (横向项目)
Teaching activities
- MFE208-Additive Manufacturing
- MFE201-Principle of Mechanical Design
Awards and honours
- Academic Excellence Award, School of IME, XJTLU, 2023
- University of Alberta AGES Scholarship, 2020
- University of Alberta Sadler Scholarship in Mechanical Engineering Department, 2019
- University of Alberta Fully Funded Ph.D. Scholarship, 2016
- University of Manchester Outstanding Performance Graduates Award, 2016

电话
+86 (0)51288970753
电子邮件
Yufan.Zheng@xjtlu.edu.cn
地址
A-4035(TC Campus-Building A)
Suzhou Dushu Lake Science and Education Innovation District
Suzhou Industrial Park
Suzhou
P.R.China
215123

Yufan ZhengPh.D.

Profile

Qualifications

Experience

Research interests

Articles

Proceedings

Conference presentations

Grants

Teaching activities

Awards and honours